DXDF60-11 Common powder back seal
Product Features
1.The bag making system adopts an inlet motor and selects DSP digital drivers to use subdivision technology, resulting in high bag making accuracy with an error of less than 1 millimeter.
2.Adopt sealing and cutting one-piece saw-toth cutter, the packing speed is fast, the cuter position can be adjusted at willin the machine running.
3.Heat sealer four-pipe heating control, two sides of each sealed road can be adjusted separately, good heat balance, ensure sealing quality, suitable for a variety of packag -ing materials.
4.Intelligent photoelectric color calibration control system.
5.PLC Control System, 7-inch touch screen man-machine interface, easy to set up and operate.
6.Side-opening protective door with good visibility, safe operation.
7.Servo motor drive screw unloading mode, can be in the process of machine operation at any time to adjust the packaging capacity, reduce material, material loss, improve work efficiency.
powder
Back sealed sample
(Note: Ignore the finished product in the sample bag of this picture)
Specifications
Model |
DXDF60-11 |
Packingspeed(bag/minute) |
30~60 |
Measurement range(ML) |
1-80ml |
Bag size(mm) |
Length 40~150, width 20~105 |
Power(KW) |
1.72 |
Weight(KG) |
215 |
Shape size(mm) |
750×840X 1700 |
Packing material diameter |
≤320(mm) |
Power supply voltage |
Three-phase four-wire 380V/50Hz or 220V |
||
Packging Materials |
Packaging Materials Various Composite Membrane Packaging Materials |
||
Working Environment Temperature |
0～40℃ |
||
Working Enviroment Humidity |
20～90%RH(No Condensation) |
||
Working environment |
Non-corrosive, flammable and explosive gases and dust in the working environment |
||
Send Inquiry
We are committed to providing you with the best quality service and look forward to communicating with you to solve problems together and bring you a better experience.